[RaspPi] Build Raspberry Pi Kernel for Debian Wheezy / Raspbian with eGalax Touchscreen Support on Ubuntu 12.04

Mon, 02 Sep 2013 14:54:35 +0000

Preperations

sudo apt-get install git libncurses5 libncurses5-dev qt4-dev-tools qt4-qmake pkg-config build-essential gcc-arm-linux-gnueabi bc

Clone Stuff

mkdir rpi_kernel  
cd rpi_kernel  
git clone https://github.com/raspberrypi/tools.git  
git clone https://github.com/raspberrypi/linux.git  
git clone https://github.com/raspberrypi/firmware.git  
cd ~/rpi_kernel/firmware/.git  
git branch -a  
cd ~/rpi_kernel/firmware  
git checkout -t -b next remotes/origin/next  
git pull  
cd ~/rpi_kernel

Make Kernel

cd linux  
make mrproper  
mkdir ../kernel  
# Kernel Types  
# find . -name \*bcmrpi\*config -print  
# ./arch/arm/configs/bcmrpi_emergency_defconfig  
# ./arch/arm/configs/bcmrpi_defconfig  
# ./arch/arm/configs/bcmrpi_cutdown_defconfig  
make O=../kernel/ ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- bcmrpi_defconfig  
make O=../kernel/ ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- menuconfig #xconfig  
#Device Drivers->Input Device Support->TouchScreens->USB Touchscreen Driver (Build it into or as module, check if eGalax here!)  
make O=../kernel/ ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- -k -j3  
cd ../  
cd tools/mkimage  
./imagetool-uncompressed.py ../../kernel/arch/arm/boot/Image  
cd ../../

Make Modules

cd kernel  
mkdir ../modules/  
make modules_install ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- INSTALL_MOD_PATH=../modules/

Install Kernel on existing RPi SD Card / Raspbian

# mount sdcard in your Ubuntu (I made an folder sdb1 for boot partiton and sdb2 for the root partition)  
cd ~  
mkdir sdb1 sdb2  
mount /dev/sdb1 sdb1  
mount /dev/sdb2 sdb2

# backup config  
cp ~/sdb1/config.txt ~/rpi_kernel/  
# boot partition  
sudo rm -rf ~/sdb1/*  
# Copy all Files from boot  
cp -R ~/rpi_kernel/firmware/boot/* ~/sdb1/  
#replace /sdb1/boot/kernel.img with the previously created kernel image  
sudo rm ~/sdb1/kernel.img  
cp ~/rpi_kernel/tools/mkimage/kernel.img ~/sdb1/  
# restore config  
cp ~/rpi_kernel/config.txt ~/sdb1/

# root partition  
#replace /sdb2/lib/firmware with <modules_builded_above_folder>/lib/firmware  
sudo rm -rf ~/sdb2/lib/firmware/  
sudo cp -R ~/rpi_kernel/modules/lib/firmware/ ~/sdb2/lib/  
#replace /sdb2/lib/modules with <modules_builded_above_folder>/lib/modules  
sudo rm -rf ~/sdb2/lib/modules/  
sudo cp -R ~/rpi_kernel/modules/lib/modules/ ~/sdb2/lib/  
#replace /sdb2/opt/vc with firmware-next/hardfp/opt/vc/  
sudo rm -rf ~/sdb2/opt/vc  
sudo cp -R ~/rpi_kernel/firmware/hardfp/opt/vc/ ~/sdb2/opt/

# sync usb mount  
sync

# Unmount sdcard  
cd ~  
umount sdb1  
umount sdb2

Boot Pi and calibrate Touchscreen

# This stuff happens on the Pi!

Preperations

sudo apt-get install libx11-dev libxext-dev libxi-dev x11proto-input-dev

Install Tool / xinput_calibrator

cd ~  
wget http://github.com/downloads/tias/xinput_calibrator/xinput_calibrator-0.7.5.tar.gz  
tar -xvzf xinput_calibrator-0.7.5.tar.gz  
cd xinput_calibrator-0.7.5  
./configure  
make  
sudo make install

Calibrate (in Xserver, so open Terminal while beeing in Graphical User Mode)

xinput_calibrator

It will give output like this:

Touchscreen on Nico Maas

[RaspPi] Build Raspberry Pi Kernel for Debian Wheezy / Raspbian with eGalax Touchscreen Support on Ubuntu 12.04

Preperations

Clone Stuff

Make Kernel

Make Modules

Install Kernel on existing RPi SD Card / Raspbian

Boot Pi and calibrate Touchscreen

Preperations

Install Tool / xinput_calibrator

Calibrate (in Xserver, so open Terminal while beeing in Graphical User Mode)