{"id":962,"date":"2015-03-20T15:08:08","date_gmt":"2015-03-20T13:08:08","guid":{"rendered":"http:\/\/www.nico-maas.de\/wordpress\/?p=962"},"modified":"2015-03-04T15:08:38","modified_gmt":"2015-03-04T13:08:38","slug":"rasppi-virtual-accesspoint-on-xbian","status":"publish","type":"post","link":"https:\/\/www.nico-maas.de\/?p=962","title":{"rendered":"[RaspPi] Virtual Accesspoint on Xbian"},"content":{"rendered":"<p>Little How To to get an Virtual AP running on XBian.<br \/>\nI did NOT choose to install an DHCP Server on Xbian, as I just wanted to use the central one in my network.<\/p>\n<p>1.) Install software<br \/>\nsudo apt-get update<br \/>\nsudo apt-get install install hostapd hostap-utils iw bridge-utils<\/p>\n<p>2.) Update hostapd<br \/>\ncd ~<br \/>\nwget http:\/\/www.adafruit.com\/downloads\/adafruit_hostapd.zip<br \/>\nunzip adafruit_hostapd.zip<br \/>\nsudo mv \/usr\/sbin\/hostapd \/usr\/sbin\/hostapd.ORIG<br \/>\nsudo mv hostapd \/usr\/sbin<br \/>\nsudo chmod 755 \/usr\/sbin\/hostapd<\/p>\n<p>3.) Configure hostapd<br \/>\nsudo vi \/etc\/hostapd\/hostapd.conf<\/p>\n<p>interface=wlan0<br \/>\nbridge=br0<br \/>\ndriver=rtl871xdrv<br \/>\nssid=MY_SSID<br \/>\nhw_mode=g<br \/>\nieee80211n=1<br \/>\nchannel=11<br \/>\nmacaddr_acl=0<br \/>\nauth_algs=1<br \/>\nignore_broadcast_ssid=0<br \/>\nwpa=3<br \/>\nwpa_passphrase=MY_PASSWORD<br \/>\nwpa_key_mgmt=WPA-PSK<br \/>\nwpa_pairwise=TKIP<br \/>\nrsn_pairwise=CCMP<\/p>\n<p>sudo vi \/etc\/default\/hostapd<\/p>\n<p>Change<br \/>\n #DAEMON_CONF=\"\"<br \/>\nto<br \/>\n DAEMON_CONF=\"\/etc\/hostapd\/hostapd.conf\"<br \/>\nand save file<\/p>\n<p>4.) Configure hostapd autostart<br \/>\nsudo update-rc.d hostapd enable <\/p>\n<p>5.) Configure IPv4 Forward<br \/>\nsudo vi \/etc\/sysctl.conf<\/p>\n<p>add<br \/>\nnet.ipv4.ip_forward=1<br \/>\nto the end of the file and save<\/p>\n<p>6.) Configure interfaces<br \/>\n# You will need to change the IP address and network to your networks settings!<br \/>\nsudo vi \/etc\/network\/interfaces<\/p>\n<p>auto lo br0<br \/>\niface lo inet loopback<\/p>\n<p>iface eth0 inet dhcp<br \/>\nallow hotplug wlan0<br \/>\niface wlan0 inet manual<\/p>\n<p>iface br0 inet static<br \/>\n        bridge-ports eth0 wlan0<br \/>\n        address 192.168.1.75<br \/>\n        netmask 255.255.255.0<br \/>\n        network 192.168.1.0<br \/>\n        broadcast 192.168.1.255<br \/>\n        gateway 192.168.1.1<\/p>\n<p>7.) Configure rc.local for boot<br \/>\nsudo vi \/etc\/rc.local<\/p>\n<p>add before exit 0<\/p>\n<p>ifup br0<br \/>\n\/etc\/init.d\/hostapd restart<\/p>\n<p>save and exit<\/p>\n<p>8.) Reboot<br \/>\nsudo reboot<\/p>\n<p>Material used and thanks to:<br \/>\nhttps:\/\/learn.adafruit.com\/setting-up-a-raspberry-pi-as-a-wifi-access-point\/overview<br \/>\nhttp:\/\/www.instructables.com\/id\/How-to-make-a-WiFi-Access-Point-out-of-a-Raspberry\/#step1<br \/>\nhttps:\/\/wiki.debian.org\/BridgeNetworkConnections<\/p>\n<div class=\"shariff shariff-align-left shariff-widget-align-left\"><ul class=\"shariff-buttons theme-round orientation-horizontal buttonsize-small\"><li class=\"shariff-button printer shariff-nocustomcolor\" style=\"background-color:#a8a8a8\"><a href=\"javascript:window.print()\" title=\"print\" aria-label=\"print\" role=\"button\" rel=\"noopener nofollow\" class=\"shariff-link\" style=\"; background-color:#999; color:#fff\"><span class=\"shariff-icon\" style=\"\"><svg width=\"32px\" height=\"20px\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewBox=\"0 0 30 32\"><path fill=\"#999\" d=\"M6.8 27.4h16v-4.6h-16v4.6zM6.8 16h16v-6.8h-2.8q-0.7 0-1.2-0.5t-0.5-1.2v-2.8h-11.4v11.4zM27.4 17.2q0-0.5-0.3-0.8t-0.8-0.4-0.8 0.4-0.3 0.8 0.3 0.8 0.8 0.3 0.8-0.3 0.3-0.8zM29.7 17.2v7.4q0 0.2-0.2 0.4t-0.4 0.2h-4v2.8q0 0.7-0.5 1.2t-1.2 0.5h-17.2q-0.7 0-1.2-0.5t-0.5-1.2v-2.8h-4q-0.2 0-0.4-0.2t-0.2-0.4v-7.4q0-1.4 1-2.4t2.4-1h1.2v-9.7q0-0.7 0.5-1.2t1.2-0.5h12q0.7 0 1.6 0.4t1.3 0.8l2.7 2.7q0.5 0.5 0.9 1.4t0.4 1.6v4.6h1.1q1.4 0 2.4 1t1 2.4z\"\/><\/svg><\/span><\/a><\/li><li class=\"shariff-button mailto shariff-nocustomcolor\" style=\"background-color:#a8a8a8\"><a href=\"mailto:?body=https%3A%2F%2Fwww.nico-maas.de%2F%3Fp%3D962&subject=%5BRaspPi%5D%20Virtual%20Accesspoint%20on%20Xbian\" title=\"Send by email\" aria-label=\"Send by email\" role=\"button\" rel=\"noopener nofollow\" class=\"shariff-link\" style=\"; background-color:#999; color:#fff\"><span class=\"shariff-icon\" style=\"\"><svg width=\"32px\" height=\"20px\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewBox=\"0 0 32 32\"><path fill=\"#999\" d=\"M32 12.7v14.2q0 1.2-0.8 2t-2 0.9h-26.3q-1.2 0-2-0.9t-0.8-2v-14.2q0.8 0.9 1.8 1.6 6.5 4.4 8.9 6.1 1 0.8 1.6 1.2t1.7 0.9 2 0.4h0.1q0.9 0 2-0.4t1.7-0.9 1.6-1.2q3-2.2 8.9-6.1 1-0.7 1.8-1.6zM32 7.4q0 1.4-0.9 2.7t-2.2 2.2q-6.7 4.7-8.4 5.8-0.2 0.1-0.7 0.5t-1 0.7-0.9 0.6-1.1 0.5-0.9 0.2h-0.1q-0.4 0-0.9-0.2t-1.1-0.5-0.9-0.6-1-0.7-0.7-0.5q-1.6-1.1-4.7-3.2t-3.6-2.6q-1.1-0.7-2.1-2t-1-2.5q0-1.4 0.7-2.3t2.1-0.9h26.3q1.2 0 2 0.8t0.9 2z\"\/><\/svg><\/span><\/a><\/li><li class=\"shariff-button twitter shariff-nocustomcolor\" style=\"background-color:#595959\"><a href=\"https:\/\/twitter.com\/share?url=https%3A%2F%2Fwww.nico-maas.de%2F%3Fp%3D962&text=%5BRaspPi%5D%20Virtual%20Accesspoint%20on%20Xbian\" title=\"Share on X\" aria-label=\"Share on X\" role=\"button\" rel=\"noopener nofollow\" class=\"shariff-link\" style=\"; background-color:#000; color:#fff\" target=\"_blank\"><span class=\"shariff-icon\" style=\"\"><svg width=\"32px\" height=\"20px\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewBox=\"0 0 24 24\"><path fill=\"#000\" d=\"M14.258 10.152L23.176 0h-2.113l-7.747 8.813L7.133 0H0l9.352 13.328L0 23.973h2.113l8.176-9.309 6.531 9.309h7.133zm-2.895 3.293l-.949-1.328L2.875 1.56h3.246l6.086 8.523.945 1.328 7.91 11.078h-3.246zm0 0\"\/><\/svg><\/span><\/a><\/li><li class=\"shariff-button facebook shariff-nocustomcolor\" style=\"background-color:#4273c8\"><a href=\"https:\/\/www.facebook.com\/sharer\/sharer.php?u=https%3A%2F%2Fwww.nico-maas.de%2F%3Fp%3D962\" title=\"Share on Facebook\" aria-label=\"Share on Facebook\" role=\"button\" rel=\"nofollow\" class=\"shariff-link\" style=\"; background-color:#3b5998; color:#fff\" target=\"_blank\"><span class=\"shariff-icon\" style=\"\"><svg width=\"32px\" height=\"20px\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewBox=\"0 0 18 32\"><path fill=\"#3b5998\" d=\"M17.1 0.2v4.7h-2.8q-1.5 0-2.1 0.6t-0.5 1.9v3.4h5.2l-0.7 5.3h-4.5v13.6h-5.5v-13.6h-4.5v-5.3h4.5v-3.9q0-3.3 1.9-5.2t5-1.8q2.6 0 4.1 0.2z\"\/><\/svg><\/span><\/a><\/li><li class=\"shariff-button linkedin shariff-nocustomcolor\" style=\"background-color:#1488bf\"><a href=\"https:\/\/www.linkedin.com\/sharing\/share-offsite\/?url=https%3A%2F%2Fwww.nico-maas.de%2F%3Fp%3D962\" title=\"Share on LinkedIn\" aria-label=\"Share on LinkedIn\" role=\"button\" rel=\"noopener nofollow\" class=\"shariff-link\" style=\"; background-color:#0077b5; color:#fff\" target=\"_blank\"><span class=\"shariff-icon\" style=\"\"><svg width=\"32px\" height=\"20px\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewBox=\"0 0 27 32\"><path fill=\"#0077b5\" d=\"M6.2 11.2v17.7h-5.9v-17.7h5.9zM6.6 5.7q0 1.3-0.9 2.2t-2.4 0.9h0q-1.5 0-2.4-0.9t-0.9-2.2 0.9-2.2 2.4-0.9 2.4 0.9 0.9 2.2zM27.4 18.7v10.1h-5.9v-9.5q0-1.9-0.7-2.9t-2.3-1.1q-1.1 0-1.9 0.6t-1.2 1.5q-0.2 0.5-0.2 1.4v9.9h-5.9q0-7.1 0-11.6t0-5.3l0-0.9h5.9v2.6h0q0.4-0.6 0.7-1t1-0.9 1.6-0.8 2-0.3q3 0 4.9 2t1.9 6z\"\/><\/svg><\/span><\/a><\/li><li class=\"shariff-button reddit shariff-nocustomcolor\" style=\"background-color:#ff5700\"><a href=\"https:\/\/www.reddit.com\/submit?url=https%3A%2F%2Fwww.nico-maas.de%2F%3Fp%3D962\" title=\"Share on Reddit\" aria-label=\"Share on Reddit\" role=\"button\" rel=\"noopener nofollow\" class=\"shariff-link\" style=\"; background-color:#ff4500; color:#fff\" target=\"_blank\"><span class=\"shariff-icon\" style=\"\"><svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewBox=\"0 0 512 512\"><path fill=\"#ff4500\" d=\"M440.3 203.5c-15 0-28.2 6.2-37.9 15.9-35.7-24.7-83.8-40.6-137.1-42.3L293 52.3l88.2 19.8c0 21.6 17.6 39.2 39.2 39.2 22 0 39.7-18.1 39.7-39.7s-17.6-39.7-39.7-39.7c-15.4 0-28.7 9.3-35.3 22l-97.4-21.6c-4.9-1.3-9.7 2.2-11 7.1L246.3 177c-52.9 2.2-100.5 18.1-136.3 42.8-9.7-10.1-23.4-16.3-38.4-16.3-55.6 0-73.8 74.6-22.9 100.1-1.8 7.9-2.6 16.3-2.6 24.7 0 83.8 94.4 151.7 210.3 151.7 116.4 0 210.8-67.9 210.8-151.7 0-8.4-.9-17.2-3.1-25.1 49.9-25.6 31.5-99.7-23.8-99.7zM129.4 308.9c0-22 17.6-39.7 39.7-39.7 21.6 0 39.2 17.6 39.2 39.7 0 21.6-17.6 39.2-39.2 39.2-22 .1-39.7-17.6-39.7-39.2zm214.3 93.5c-36.4 36.4-139.1 36.4-175.5 0-4-3.5-4-9.7 0-13.7 3.5-3.5 9.7-3.5 13.2 0 27.8 28.5 120 29 149 0 3.5-3.5 9.7-3.5 13.2 0 4.1 4 4.1 10.2.1 13.7zm-.8-54.2c-21.6 0-39.2-17.6-39.2-39.2 0-22 17.6-39.7 39.2-39.7 22 0 39.7 17.6 39.7 39.7-.1 21.5-17.7 39.2-39.7 39.2z\"\/><\/svg><\/span><\/a><\/li><li class=\"shariff-button pinterest shariff-nocustomcolor\" style=\"background-color:#e70f18\"><a href=\"https:\/\/www.pinterest.com\/pin\/create\/link\/?url=https%3A%2F%2Fwww.nico-maas.de%2F%3Fp%3D962&media=https%3A%2F%2Fwww.nico-maas.de%2Fwordpress%2Fwp-content%2Fplugins%2Fshariff%2Fimages%2FdefaultHint.png&description=%5BRaspPi%5D%20Virtual%20Accesspoint%20on%20Xbian\" title=\"Pin it on Pinterest\" aria-label=\"Pin it on Pinterest\" role=\"button\" rel=\"noopener nofollow\" class=\"shariff-link\" style=\"; background-color:#cb2027; color:#fff\" target=\"_blank\"><span class=\"shariff-icon\" style=\"\"><svg width=\"32px\" height=\"20px\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewBox=\"0 0 27 32\"><path fill=\"#cb2027\" d=\"M27.4 16q0 3.7-1.8 6.9t-5 5-6.9 1.9q-2 0-3.9-0.6 1.1-1.7 1.4-2.9 0.2-0.6 1-3.8 0.4 0.7 1.3 1.2t2 0.5q2.1 0 3.8-1.2t2.7-3.4 0.9-4.8q0-2-1.1-3.8t-3.1-2.9-4.5-1.2q-1.9 0-3.5 0.5t-2.8 1.4-2 2-1.2 2.3-0.4 2.4q0 1.9 0.7 3.3t2.1 2q0.5 0.2 0.7-0.4 0-0.1 0.1-0.5t0.2-0.5q0.1-0.4-0.2-0.8-0.9-1.1-0.9-2.7 0-2.7 1.9-4.6t4.9-2q2.7 0 4.2 1.5t1.5 3.8q0 3-1.2 5.2t-3.1 2.1q-1.1 0-1.7-0.8t-0.4-1.9q0.1-0.6 0.5-1.7t0.5-1.8 0.2-1.4q0-0.9-0.5-1.5t-1.4-0.6q-1.1 0-1.9 1t-0.8 2.6q0 1.3 0.4 2.2l-1.8 7.5q-0.3 1.2-0.2 3.2-3.7-1.6-6-5t-2.3-7.6q0-3.7 1.9-6.9t5-5 6.9-1.9 6.9 1.9 5 5 1.8 6.9z\"\/><\/svg><\/span><\/a><\/li><\/ul><\/div>","protected":false},"excerpt":{"rendered":"<p>Little How To to get an Virtual AP running on XBian. I did NOT choose to install an DHCP Server on Xbian, as I just wanted to use the central one in my network. 1.) Install software sudo apt-get update sudo apt-get install install hostapd hostap-utils iw bridge-utils 2.) Update hostapd cd ~ wget http:\/\/www.adafruit.com\/downloads\/adafruit_hostapd.zip &hellip; <a href=\"https:\/\/www.nico-maas.de\/?p=962\" class=\"more-link\">Continue reading <span class=\"screen-reader-text\">[RaspPi] Virtual Accesspoint on Xbian<\/span> <span class=\"meta-nav\">&rarr;<\/span><\/a><\/p>\n<div class=\"shariff shariff-align-left shariff-widget-align-left\"><ul class=\"shariff-buttons theme-round orientation-horizontal buttonsize-small\"><li class=\"shariff-button printer shariff-nocustomcolor\" style=\"background-color:#a8a8a8\"><a href=\"javascript:window.print()\" title=\"print\" aria-label=\"print\" role=\"button\" rel=\"noopener nofollow\" class=\"shariff-link\" style=\"; background-color:#999; color:#fff\"><span class=\"shariff-icon\" style=\"\"><svg width=\"32px\" height=\"20px\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewBox=\"0 0 30 32\"><path fill=\"#999\" d=\"M6.8 27.4h16v-4.6h-16v4.6zM6.8 16h16v-6.8h-2.8q-0.7 0-1.2-0.5t-0.5-1.2v-2.8h-11.4v11.4zM27.4 17.2q0-0.5-0.3-0.8t-0.8-0.4-0.8 0.4-0.3 0.8 0.3 0.8 0.8 0.3 0.8-0.3 0.3-0.8zM29.7 17.2v7.4q0 0.2-0.2 0.4t-0.4 0.2h-4v2.8q0 0.7-0.5 1.2t-1.2 0.5h-17.2q-0.7 0-1.2-0.5t-0.5-1.2v-2.8h-4q-0.2 0-0.4-0.2t-0.2-0.4v-7.4q0-1.4 1-2.4t2.4-1h1.2v-9.7q0-0.7 0.5-1.2t1.2-0.5h12q0.7 0 1.6 0.4t1.3 0.8l2.7 2.7q0.5 0.5 0.9 1.4t0.4 1.6v4.6h1.1q1.4 0 2.4 1t1 2.4z\"\/><\/svg><\/span><\/a><\/li><li class=\"shariff-button mailto shariff-nocustomcolor\" style=\"background-color:#a8a8a8\"><a href=\"mailto:?body=https%3A%2F%2Fwww.nico-maas.de%2F%3Fp%3D962&subject=%5BRaspPi%5D%20Virtual%20Accesspoint%20on%20Xbian\" title=\"Send by email\" aria-label=\"Send by email\" role=\"button\" rel=\"noopener nofollow\" class=\"shariff-link\" style=\"; background-color:#999; color:#fff\"><span class=\"shariff-icon\" style=\"\"><svg width=\"32px\" height=\"20px\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewBox=\"0 0 32 32\"><path fill=\"#999\" d=\"M32 12.7v14.2q0 1.2-0.8 2t-2 0.9h-26.3q-1.2 0-2-0.9t-0.8-2v-14.2q0.8 0.9 1.8 1.6 6.5 4.4 8.9 6.1 1 0.8 1.6 1.2t1.7 0.9 2 0.4h0.1q0.9 0 2-0.4t1.7-0.9 1.6-1.2q3-2.2 8.9-6.1 1-0.7 1.8-1.6zM32 7.4q0 1.4-0.9 2.7t-2.2 2.2q-6.7 4.7-8.4 5.8-0.2 0.1-0.7 0.5t-1 0.7-0.9 0.6-1.1 0.5-0.9 0.2h-0.1q-0.4 0-0.9-0.2t-1.1-0.5-0.9-0.6-1-0.7-0.7-0.5q-1.6-1.1-4.7-3.2t-3.6-2.6q-1.1-0.7-2.1-2t-1-2.5q0-1.4 0.7-2.3t2.1-0.9h26.3q1.2 0 2 0.8t0.9 2z\"\/><\/svg><\/span><\/a><\/li><li class=\"shariff-button twitter shariff-nocustomcolor\" style=\"background-color:#595959\"><a href=\"https:\/\/twitter.com\/share?url=https%3A%2F%2Fwww.nico-maas.de%2F%3Fp%3D962&text=%5BRaspPi%5D%20Virtual%20Accesspoint%20on%20Xbian\" title=\"Share on X\" aria-label=\"Share on X\" role=\"button\" rel=\"noopener nofollow\" class=\"shariff-link\" style=\"; background-color:#000; color:#fff\" target=\"_blank\"><span class=\"shariff-icon\" style=\"\"><svg width=\"32px\" height=\"20px\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewBox=\"0 0 24 24\"><path fill=\"#000\" d=\"M14.258 10.152L23.176 0h-2.113l-7.747 8.813L7.133 0H0l9.352 13.328L0 23.973h2.113l8.176-9.309 6.531 9.309h7.133zm-2.895 3.293l-.949-1.328L2.875 1.56h3.246l6.086 8.523.945 1.328 7.91 11.078h-3.246zm0 0\"\/><\/svg><\/span><\/a><\/li><li class=\"shariff-button facebook shariff-nocustomcolor\" style=\"background-color:#4273c8\"><a href=\"https:\/\/www.facebook.com\/sharer\/sharer.php?u=https%3A%2F%2Fwww.nico-maas.de%2F%3Fp%3D962\" title=\"Share on Facebook\" aria-label=\"Share on Facebook\" role=\"button\" rel=\"nofollow\" class=\"shariff-link\" style=\"; background-color:#3b5998; color:#fff\" target=\"_blank\"><span class=\"shariff-icon\" style=\"\"><svg width=\"32px\" height=\"20px\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewBox=\"0 0 18 32\"><path fill=\"#3b5998\" d=\"M17.1 0.2v4.7h-2.8q-1.5 0-2.1 0.6t-0.5 1.9v3.4h5.2l-0.7 5.3h-4.5v13.6h-5.5v-13.6h-4.5v-5.3h4.5v-3.9q0-3.3 1.9-5.2t5-1.8q2.6 0 4.1 0.2z\"\/><\/svg><\/span><\/a><\/li><li class=\"shariff-button linkedin shariff-nocustomcolor\" style=\"background-color:#1488bf\"><a href=\"https:\/\/www.linkedin.com\/sharing\/share-offsite\/?url=https%3A%2F%2Fwww.nico-maas.de%2F%3Fp%3D962\" title=\"Share on LinkedIn\" aria-label=\"Share on LinkedIn\" role=\"button\" rel=\"noopener nofollow\" class=\"shariff-link\" style=\"; background-color:#0077b5; color:#fff\" target=\"_blank\"><span class=\"shariff-icon\" style=\"\"><svg width=\"32px\" height=\"20px\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewBox=\"0 0 27 32\"><path fill=\"#0077b5\" d=\"M6.2 11.2v17.7h-5.9v-17.7h5.9zM6.6 5.7q0 1.3-0.9 2.2t-2.4 0.9h0q-1.5 0-2.4-0.9t-0.9-2.2 0.9-2.2 2.4-0.9 2.4 0.9 0.9 2.2zM27.4 18.7v10.1h-5.9v-9.5q0-1.9-0.7-2.9t-2.3-1.1q-1.1 0-1.9 0.6t-1.2 1.5q-0.2 0.5-0.2 1.4v9.9h-5.9q0-7.1 0-11.6t0-5.3l0-0.9h5.9v2.6h0q0.4-0.6 0.7-1t1-0.9 1.6-0.8 2-0.3q3 0 4.9 2t1.9 6z\"\/><\/svg><\/span><\/a><\/li><li class=\"shariff-button reddit shariff-nocustomcolor\" style=\"background-color:#ff5700\"><a href=\"https:\/\/www.reddit.com\/submit?url=https%3A%2F%2Fwww.nico-maas.de%2F%3Fp%3D962\" title=\"Share on Reddit\" aria-label=\"Share on Reddit\" role=\"button\" rel=\"noopener nofollow\" class=\"shariff-link\" style=\"; background-color:#ff4500; color:#fff\" target=\"_blank\"><span class=\"shariff-icon\" style=\"\"><svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewBox=\"0 0 512 512\"><path fill=\"#ff4500\" d=\"M440.3 203.5c-15 0-28.2 6.2-37.9 15.9-35.7-24.7-83.8-40.6-137.1-42.3L293 52.3l88.2 19.8c0 21.6 17.6 39.2 39.2 39.2 22 0 39.7-18.1 39.7-39.7s-17.6-39.7-39.7-39.7c-15.4 0-28.7 9.3-35.3 22l-97.4-21.6c-4.9-1.3-9.7 2.2-11 7.1L246.3 177c-52.9 2.2-100.5 18.1-136.3 42.8-9.7-10.1-23.4-16.3-38.4-16.3-55.6 0-73.8 74.6-22.9 100.1-1.8 7.9-2.6 16.3-2.6 24.7 0 83.8 94.4 151.7 210.3 151.7 116.4 0 210.8-67.9 210.8-151.7 0-8.4-.9-17.2-3.1-25.1 49.9-25.6 31.5-99.7-23.8-99.7zM129.4 308.9c0-22 17.6-39.7 39.7-39.7 21.6 0 39.2 17.6 39.2 39.7 0 21.6-17.6 39.2-39.2 39.2-22 .1-39.7-17.6-39.7-39.2zm214.3 93.5c-36.4 36.4-139.1 36.4-175.5 0-4-3.5-4-9.7 0-13.7 3.5-3.5 9.7-3.5 13.2 0 27.8 28.5 120 29 149 0 3.5-3.5 9.7-3.5 13.2 0 4.1 4 4.1 10.2.1 13.7zm-.8-54.2c-21.6 0-39.2-17.6-39.2-39.2 0-22 17.6-39.7 39.2-39.7 22 0 39.7 17.6 39.7 39.7-.1 21.5-17.7 39.2-39.7 39.2z\"\/><\/svg><\/span><\/a><\/li><li class=\"shariff-button pinterest shariff-nocustomcolor\" style=\"background-color:#e70f18\"><a href=\"https:\/\/www.pinterest.com\/pin\/create\/link\/?url=https%3A%2F%2Fwww.nico-maas.de%2F%3Fp%3D962&media=https%3A%2F%2Fwww.nico-maas.de%2Fwordpress%2Fwp-content%2Fplugins%2Fshariff%2Fimages%2FdefaultHint.png&description=%5BRaspPi%5D%20Virtual%20Accesspoint%20on%20Xbian\" title=\"Pin it on Pinterest\" aria-label=\"Pin it on Pinterest\" role=\"button\" rel=\"noopener nofollow\" class=\"shariff-link\" style=\"; background-color:#cb2027; color:#fff\" target=\"_blank\"><span class=\"shariff-icon\" style=\"\"><svg width=\"32px\" height=\"20px\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewBox=\"0 0 27 32\"><path fill=\"#cb2027\" d=\"M27.4 16q0 3.7-1.8 6.9t-5 5-6.9 1.9q-2 0-3.9-0.6 1.1-1.7 1.4-2.9 0.2-0.6 1-3.8 0.4 0.7 1.3 1.2t2 0.5q2.1 0 3.8-1.2t2.7-3.4 0.9-4.8q0-2-1.1-3.8t-3.1-2.9-4.5-1.2q-1.9 0-3.5 0.5t-2.8 1.4-2 2-1.2 2.3-0.4 2.4q0 1.9 0.7 3.3t2.1 2q0.5 0.2 0.7-0.4 0-0.1 0.1-0.5t0.2-0.5q0.1-0.4-0.2-0.8-0.9-1.1-0.9-2.7 0-2.7 1.9-4.6t4.9-2q2.7 0 4.2 1.5t1.5 3.8q0 3-1.2 5.2t-3.1 2.1q-1.1 0-1.7-0.8t-0.4-1.9q0.1-0.6 0.5-1.7t0.5-1.8 0.2-1.4q0-0.9-0.5-1.5t-1.4-0.6q-1.1 0-1.9 1t-0.8 2.6q0 1.3 0.4 2.2l-1.8 7.5q-0.3 1.2-0.2 3.2-3.7-1.6-6-5t-2.3-7.6q0-3.7 1.9-6.9t5-5 6.9-1.9 6.9 1.9 5 5 1.8 6.9z\"\/><\/svg><\/span><\/a><\/li><\/ul><\/div>","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_crdt_document":"","jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2}},"categories":[280,18],"tags":[391,484,390],"class_list":["post-962","post","type-post","status-publish","format-standard","hentry","category-raspberry-pi","category-unix-linux","tag-access-point","tag-raspberry-pi","tag-xbian"],"jetpack_publicize_connections":[],"jetpack_featured_media_url":"","jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/piXYf-fw","jetpack-related-posts":[{"id":1076,"url":"https:\/\/www.nico-maas.de\/?p=1076","url_meta":{"origin":962,"position":0},"title":"[RaspPi] Minibian Basic Setup","author":"Nico Maas","date":"7. April 2015","format":false,"excerpt":"For basic appliances with an very specific task, an complete Raspbian Installation can be too heavy weight and unnecessary. Striping down Raspbian of things like Mathematica can be time consuming. Enter Minibian: Just download the Image at https:\/\/minibianpi.wordpress.com\/ and flash it to your SD Card like a normal Raspbian Image.\u2026","rel":"","context":"In &quot;Raspberry Pi&quot;","block_context":{"text":"Raspberry Pi","link":"https:\/\/www.nico-maas.de\/?cat=280"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":1193,"url":"https:\/\/www.nico-maas.de\/?p=1193","url_meta":{"origin":962,"position":1},"title":"[RPi] The cheapest Raspberry Pi Cluster Ever Made v2","author":"Nico Maas","date":"15. January 2016","format":false,"excerpt":"Ok, an little update on the PiZero Cluster Front: Now, that OTG is compiled directly into the \"next\" kernel of RPi, we can use the OTG USB Virtual Ethernet directly - which makes it a lot easier. So I updated this :). 0. Preparing Minibian Jessie Image I used some\u2026","rel":"","context":"In &quot;Computer&quot;","block_context":{"text":"Computer","link":"https:\/\/www.nico-maas.de\/?cat=4"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":1151,"url":"https:\/\/www.nico-maas.de\/?p=1151","url_meta":{"origin":962,"position":2},"title":"[RPi] The cheapest Raspberry Pi Cluster Ever Made","author":"Nico Maas","date":"26. December 2015","format":false,"excerpt":"As soon as the Pi Zero came out, I started on thinking about Clusters again. I wanted to create an big - but at the same time, cheap cluster. Yes, an Pi Zero is not nearly as fast, as an RPi 2. And yes, there are some problems with this\u2026","rel":"","context":"In &quot;Projects&quot;","block_context":{"text":"Projects","link":"https:\/\/www.nico-maas.de\/?cat=23"},"img":{"alt_text":"ppplink","src":"https:\/\/i0.wp.com\/www.nico-maas.de\/wordpress\/wp-content\/uploads\/ppplink-300x225.jpg?resize=350%2C200&ssl=1","width":350,"height":200},"classes":[]},{"id":925,"url":"https:\/\/www.nico-maas.de\/?p=925","url_meta":{"origin":962,"position":3},"title":"[RaspPi] Raspberry Pi and the ili9341 Display","author":"Nico Maas","date":"27. April 2014","format":false,"excerpt":"https:\/\/www.youtube.com\/watch?v=cEcIem6R4aQ 1.) Enable SPI # remove or comment out the spi blacklist line sudo nano \/etc\/modprobe.d\/raspi-blacklist.conf 2.) Install a) FBTFT drivers as loadable modules sudo REPO_URI=https:\/\/github.com\/notro\/rpi-firmware rpi-update sudo shutdown -r now OR b) FBTFT drivers built into the kernel proper sudo REPO_URI=https:\/\/github.com\/notro\/rpi-firmware BRANCH=builtin rpi-update sudo shutdown -r now 3.) Install\u2026","rel":"","context":"In &quot;Hardware&quot;","block_context":{"text":"Hardware","link":"https:\/\/www.nico-maas.de\/?cat=11"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":1217,"url":"https:\/\/www.nico-maas.de\/?p=1217","url_meta":{"origin":962,"position":4},"title":"[Ubuntu] Letsencrypt with Apache and Freeradius","author":"Nico Maas","date":"16. May 2016","format":false,"excerpt":"This little tutorial describes how to use Letsencrypt with Apache, Freeradius and Auto-Renewal of the Certificates. #Install Letsencrypt sudo apt-get update sudo apt-get install git cd \/opt sudo git clone https:\/\/github.com\/letsencrypt\/letsencrypt \/opt\/letsencrypt cd \/opt\/letsencrypt #Become root sudo su #\"Order\" certificates (replace SERVERDOMAIN.COM with the DNS of your Server!) .\/letsencrypt-auto --apache\u2026","rel":"","context":"In &quot;Security&quot;","block_context":{"text":"Security","link":"https:\/\/www.nico-maas.de\/?cat=415"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":808,"url":"https:\/\/www.nico-maas.de\/?p=808","url_meta":{"origin":962,"position":5},"title":"[RaspPi] Build Raspberry Pi Kernel 3.10 \/ NEXT for Debian Wheezy \/ Raspbian with eGalax Touchscreen Support on Ubuntu 12.04","author":"Nico Maas","date":"12. September 2013","format":false,"excerpt":"This is about building the latest Kernel \/ 3.10 for RPi. Bleeding Edge. # Preperations sudo apt-get install git libncurses5 libncurses5-dev qt4-dev-tools qt4-qmake pkg-config build-essential gcc-arm-linux-gnueabi bc # NEEDS BC!!!! # Clone Stuff mkdir rpi_kernel_10 cd rpi_kernel_10 git clone https:\/\/github.com\/raspberrypi\/tools.git git clone https:\/\/github.com\/raspberrypi\/linux.git cd ~\/rpi_kernel_10\/linux\/.git git branch -a cd ~\/rpi_kernel_10\/linux\u2026","rel":"","context":"In &quot;Raspberry Pi&quot;","block_context":{"text":"Raspberry Pi","link":"https:\/\/www.nico-maas.de\/?cat=280"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]}],"_links":{"self":[{"href":"https:\/\/www.nico-maas.de\/index.php?rest_route=\/wp\/v2\/posts\/962","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.nico-maas.de\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.nico-maas.de\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.nico-maas.de\/index.php?rest_route=\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.nico-maas.de\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=962"}],"version-history":[{"count":1,"href":"https:\/\/www.nico-maas.de\/index.php?rest_route=\/wp\/v2\/posts\/962\/revisions"}],"predecessor-version":[{"id":963,"href":"https:\/\/www.nico-maas.de\/index.php?rest_route=\/wp\/v2\/posts\/962\/revisions\/963"}],"wp:attachment":[{"href":"https:\/\/www.nico-maas.de\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=962"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.nico-maas.de\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=962"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.nico-maas.de\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=962"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}