{"id":448,"date":"2010-03-16T11:50:30","date_gmt":"2010-03-16T10:50:30","guid":{"rendered":"http:\/\/www.nico-maas.de\/wordpress\/?p=448"},"modified":"2010-03-16T13:17:41","modified_gmt":"2010-03-16T12:17:41","slug":"ipaq-building-serial-console-for-ipaq-3600-to-access-cisco-equipment","status":"publish","type":"post","link":"https:\/\/www.nico-maas.de\/?p=448","title":{"rendered":"[iPAQ] Building Serial Console for iPAQ 3600 to Access Cisco Equipment"},"content":{"rendered":"

After I got the iPAQ 3660 working again, I wanted to use it as Serial Console to Work on the Cisco Equipment \"on the road\". To achieve that, we need two or three things:<\/p>\n

1.) An special connector Cable to attach the Serial Console of the iPAQ with an RS232 Connector \/ the Cisco Rollover Cable
\n2.) An Terminal Software. I did choose vxHpcPlus for that ( http:\/\/www.cam.com\/vxhpcplus.html )
\n3.) Something that makes it possible to use\u00a0 Landscape Mode so that you can read the Console Output more easily:\u00a0 NYDITOT Virtual Display, Version 5.02 ( http:\/\/www.nyditot.com\/Products.asp )<\/p>\n

1.) Building the Connector \/ Adaptor Cable
\nI did order an iPAQ 3600 to Serial Connector for Active Sync. Sadly it was defect, so I did choose to rebuild it to these Specs. First I did open up the iPAQ Connector and desolder it. Than I did insert it into the iPAQ and identified the needed Connector Ports. So if you look at the bottom of the iPAQ, placed face up on flat surface you will see these Connectors:<\/p>\n

2 4 6 8 10 12
\n1 3 5 7\u00a0 9 11<\/p>\n

Wiring:
\n4 - GND
\n7 - TX
\n8 - RX
\n11 - 3,3V<\/p>\n

\n

\"\"<\/a><\/p>\n

\n

Then I got an RS232 Male Connector and did wire these things up like that:<\/p>\n

5 4 3 2 1
\n6 7 8 9<\/p>\n

( Looking at the Solder Connectors! Not the \"Connector Face\"! )<\/p>\n

2 - RX
\n3 - TX
\n5 - GND<\/p>\n

I did left the 3,3V Cable \"floating around\" for maybe future projects.<\/p>\n

\"\"<\/a><\/p>\n

\n

\n

2.) Terminal Software
\nDownload the vxHpcPlus from the Website and install it with the Help of ActiveSync.<\/p>\n

The Settings for the Serial Port are:<\/p>\n

Direct Connect - Async:
\nPort: \"Seriallkabel an COM1:\"
\nSettings: 9600, Databits: 8, Parity: None, Stop: 1, Flow Control: None
\nTelnet: Send NUL after CR
\nEmulation: VT100,
\nFont size: 6,
\nGerman Keyboard
\n80 Colums,
\nVertial Scroll,
\nAuto Wrap,
\nScroll,
\nHot Button<\/p>\n

You can also change these to 115200 if you want.<\/p>\n

3.) NYDITOT Virtual Display, Landscape
\nDownload and install with ActiveSync. You can use it to use Landscape Mode which makes reading the Serial Console more easy. Its plain forward, so play with it.<\/p>\n

Thanks a lot to Bev Howard for the excellent Printout of the Connector Port ( http:\/\/bevhoward.com\/serial.htm#36xx ) this Site: http:\/\/www.handhelds.org\/Compaq\/iPAQH3600\/iPAQ_H3600.html<\/p>\n