To get your Beaglebone Black (BBB) to work as an Logic Analyzer, you can use BeagleLogic:<\/p>\n
1.) Download latest version of BeagleLogic 2.) Burn it onto sdcard with Etcher<\/p>\n 3.) Put SDCard into BeagleBone Black<\/p>\n 4.) Hold \"Boot\" Button, plug in BBB with Mini USB Cable to your PC<\/p>\n 5.) After 10 seconds or so, release \"Boot\" Button (this will just boot from SDcard with this trick)<\/p>\n 6.) Wait some time and login to 192.168.7.2 via SSH 7.) Test if BeagleLogic works 8.) Change uEnv.txt remove # from #cmdline=init=\/opt\/scripts\/tools\/eMMC\/init-eMMC-flasher-v3.sh<\/p>\n #save and exit<\/p>\n 9.) Shutdown 10.) Boot again, this time with flasher 11.) Remove SDCard, replug Mini USB and boot without holding any buttons<\/p>\n 12.) Wait some time and login to 192.168.7.2 via SSH 13.) Open your webbrowser and go to: http:\/\/192.168.7.2:4000\/#<\/p>\n Next: Useful infos:
\nfrom: https:\/\/beaglelogic.readthedocs.io\/en\/latest\/beaglelogic_system_image.html<\/a>
\nReleased on 2017-07-13, sha256sum = be67e3b8a21c054cd6dcae7c50e9e518492d5d1ddaa83619878afeffe59c99bd
\nhttps:\/\/goo.gl\/RiXGBs<\/a><\/p>\n
\nUsername: debian
\npassword: temppwd<\/p>\n
\nls -l \/dev\/beaglelogic
\nThere should be entry \/dev\/beaglelogic as answer, if not check the BeagleLogic Website<\/p>\n
\nsudo vi \/boot\/uEnv.txt
\n#go to following lines:
\n##enable Generic eMMC Flasher:
\n##make sure, these tools are installed: dosfstools rsync
\n#cmdline=init=\/opt\/scripts\/tools\/eMMC\/init-eMMC-flasher-v3.sh<\/p>\n
\nsudo shutdown now<\/p>\n
\nHold \"Boot\" Button, plug in BBB with Mini USB Cable to your PC, after 10 seconds, release the button.
\nDuring the flash process of the eMMC, the 4 leds will make a \"Knight Rider\" like lightshow.
\nThis will take some minutes. The BBB will shutdown afterwards (all LEDs off).<\/p>\n
\nUsername: debian
\npassword: temppwd<\/p>\n
\n- Upgrade
\n- this enables you to also use the BeagleLogic as \"external analyzer\" and control it from i.e. a Window System running a special version of pulseview<\/a> \ud83d\ude42
\n- More infos: https:\/\/goo.gl\/L9QUrt<\/a>
\nConnect to Ethernet \/ Internet
\ncd \/opt\/BeagleLogic\/
\ngit config http.sslVerify false
\ngit pull
\nsudo apt update
\nsudo .\/install.sh --upgrade
\nsudo reboot now<\/p>\n
\nhttps:\/\/beagleboard.org\/getting-started#update<\/a>
\nhttp:\/\/beagleboard.org\/latest-images<\/a>
\nhttps:\/\/beaglelogic.readthedocs.io\/en\/latest\/beaglelogic_system_image.html<\/a>
\nhttps:\/\/beaglelogic.readthedocs.io\/en\/latest\/install.html<\/a><\/p>\n