{"id":1033,"date":"2015-03-11T15:05:14","date_gmt":"2015-03-11T13:05:14","guid":{"rendered":"http:\/\/www.nico-maas.de\/wordpress\/?p=1033"},"modified":"2015-03-04T15:06:34","modified_gmt":"2015-03-04T13:06:34","slug":"rasppi-install-kali-linux-on-rpi-with-hdmipi","status":"publish","type":"post","link":"https:\/\/www.nico-maas.de\/?p=1033","title":{"rendered":"[RaspPi] Install Kali Linux on RPi with HDMIPi"},"content":{"rendered":"

1.) Download Kali for RPi
\nhttps:\/\/www.offensive-security.com\/kali-linux-vmware-arm-image-download\/<\/p>\n

2.) Extract if with 7zip, format your SDCard with the Formatter from the SDCardAssociation and write the Image (kali-1.0.9-rpi.img) to your SD Card<\/p>\n

2b.) If you plan on using Kali with your HDMIPi Screen, create an config.txt file with following content on the sdcard to have correct HDMI sizing:
\n
\nhdmi_ignore_edid=0xa5000080
\nhdmi_group=2 # HDMIPi for 1280 x 800
\nhdmi_drive=2 # for alternative modes get sound
\nhdmi_mode=28 # 1280 x 800 @ 60 Hz Specifcations
\n<\/code><\/p>\n

3.) Boot it<\/p>\n

4.) After boot, login with root \/ toor<\/p>\n

5.) Install raspi-config using the terminal
\nwget https:\/\/raw.githubusercontent.com\/snubbegbg\/install_raspi-config\/master\/install.sh
\nchmod +x install.sh
\nsudo .\/install.sh<\/p>\n

6.) Configure sdcard reseize, locale and stuff using sudo raspi-config and reboot<\/p>\n

7.) Install Kali Metapackages
\nKali comes kind of \"blank\" with no tools.
\nChoose your needed package from https:\/\/www.kali.org\/news\/kali-linux-metapackages\/ and install it using apt-get.
\nBut please look out for the installation size!
\nI.e. for the kali-linux-top10 package:
\napt-get update
\napt-get install kali-linux-top10
\nOr the complete ISO package (9 GB!):
\napt-get install kali-linux-full<\/p>\n

8.) Reboot
\nsudo reboot<\/p>\n

9.) After rebooting and login with root \/ toor, enter startx to use Kali<\/p>\n